Nylon PA 11 ESD (polyamide): engineering grade SLS thermoplastic with electrostatic discharge properties
This material with electrostatic discharge properties is optimal for advanced applications and in environments where electrostatic discharges matters.
Thanks to its interesting mechanical properties, it offers new possibilities for a wide range of new applications, in particular for the electronics sector. Its great mechanical and thermal characteristics make it particularly interesting for electronic boxes, durable jigs, fixtures and tools for electronics industry.
| Standard lead time | About 7 working days, depending on part size, quantity, number of components and finishing degrees. |
|---|---|
| Standard accuracy | ±0.012 in (± 0.3 mm) - may vary depending on geometry. |
| Layer thickness | 0.004 in - 0.1 mm |
| Minimum wall thickness | 0.039 in - 1 mm |
| Maximum build dimensions | Dimensions are unlimited as components may be composed of several sub-parts. The maximum build envelope is 15 x 15 x 16 in (381 x 381 x 406 mm). |
| Surface structure | Unfinished parts typically have a grainy surface but all kinds of fine finishes are possible. Laser-sintered parts can be smoothed, painted and coated. |
| Measure | Value | Test method |
|---|---|---|
| Specific volume resistivity / Ωcm | 2.3•10⁶ (X-direction) | IEC 62631-3-1 |
| Heat deflection (0.45 MPa) | 367 °F | 186 °C | ISO 75-2 |
| Tensile strength | 9 427 psi | 65 MPa | ISO 527-2 |
| Tensile modulus | 456 869 psi | 3 150 MPa | ISO 527-2 |
| Elongation at break | 20% | ISO 527-2 |
| Flexural modulus | 442 365 psi | 3 050 MPa | DIN EN ISO 178 |
