Antero 800NA: a PEKK-based high-performance FDM thermoplastic
Antero 800NA is a PEKK-based FDM thermoplastic. It combines FDM’s design freedom and ease of use with the excellent strength, toughness and wear-resistant properties of PEKK material.
Antero 800NA exhibits high heat resistance, chemical resistance, low outgassing and dimensional stability, particularly in large parts.
Appropriate applications include aircraft components exposed to jet fuel, oil and hydraulic fluid, spacecraft parts that demand low outgassing and chemical-resistant industrial parts. Using Antero 800NA with FDM technology avoids the waste associated with subtractive manufacturing of high-cost bulk PEKK material.
Standard lead time | About 4 working days, depending on part size, quantity, number of components and finishing degrees. |
---|---|
Standard accuracy | ±0.012 in (± 0.3 mm) - may vary depending on geometry. |
Layer thickness | 0.010 in - 0.254 mm |
Minimum wall thickness | 0.039 in - 1 mm |
Maximum build dimensions | Dimensions are unlimited as components may be composed of several sub-parts. The maximum build envelope is 3 x 2 x 3 ft (914 x 610 x 914 mm). |
Surface structure | Unfinished parts typically have a rough surface but all kinds of fine finishes are possible. FDM/FFF parts can be smoothed, painted and coated. |
Measure | Value | Test method |
---|---|---|
Tensile strength | 13 504 psi | 93.1 MPa | ASTM D638 |
Tensile modulus | 448.9 ksi | 3.1 GPa | ASTM D638 |
Elongation at break | 6.4% | ASTM D638 |
Heat deflection temperature (HDT) at 66 psi | 302 °F | 150 °C | ASTM D648 |
Heat deflection temperature (HDT) at 264 psi | 297 °F | 147 °C | ASTM D648 |
Density | 1.28 g/cm3 | ASTM D792 |
We are committed to enlightening you in your choices. Here is a tool to help you compare the different layers thickness.
Note that we also offer the finishing service, to meet all your specific needs.
Need more assistance?
CONTACT OUR ENGINEERING EXPERTSWe strongly recommend to our customers a good preparation of digital 3D files. This preparation will ensure the quality and optimal 3D printing of your files.
If your file has multiple assembled parts that contain overlaps, it is important to unify into a single solid file. If you are working with surface files and shells, it is important to transform the surface models into a solid format.
The quality of 3D files is very important. We prefer to work with parametric models. This allows us to optimize the resolution when creating .STL files for the best results.
If you decide to transform a parameterized file yourself into an .STL file, you must ensure that you have enough resolution to keep most of the characteristics. Otherwise, there is a risk of losing important functions of your 3D model.
We accept file formats: Solidworks, Catia, STEP, IGES, Parasolid (X_T, X_B), and .STL high resolution.
All processes have manufacturing limits. With 3D printing, the wall thickness has a direct impact on the selection of layer thicknesses. A simple rule to follow is to make sure you have wall thicknesses 4 times greater than the layer thicknesses.
The selection of layer thicknesses will influence three important aspects of a 3D printed part.
All manufacturing processes have a variation. When programming 3D files for 3D printing we make sure to manage the shrinking effects inherent in thermoplastics. We have a multitude of controls that reduce variation and provide exemplary repeatability with all of our technological processes.
Depending on the geometry of the parts, the tolerances vary around:
When producing multiple parts, it is possible to make changes to 3D files to achieve better accuracy.
Orientation orthogonal to the XY fabrication plane is important to maximize the accuracy of the part. We obtain greater precision in the X and Y axes.
We accept file formats: Solidworks, Catia, STEP, IGES, Parasolid (X_T , X_B), high-resolution .STL.